Setting Up A Shadow Master In Grid Engine

1) Create the shadow_masters file 
2) Verify correct permissions 
3) Start the shadowd daemon(s)

1) Create a shadow_masters file

The file needs to be created in $SGE_ROOT/default/common. This file should contain the name of the primary master host as the first line. Other hosts that are chosen to assume master responsibility should then be listed in the order desired. For example:

>cat shadow_masters
host1
host2
host3

Here, host1 is the primary master host. Should host1 fail, host2 will take over as the master server after a period of approximately 10 minutes. Further, if host2 should then fail, host3 will take over.

2) Verify correct permissions

All master shadow hosts must have read/write permissions to the qmaster spool directory.

3) Start the shadow daemons

The shadow daemon must be started on all shadow master hosts. This is done via the startup script, rcsge. As root on each host, run the following: 

 $SGE_ROOT/default/common/rcsge -shadowd       [Version 5.3 and its patches]
 $SGE_ROOT/default/common/sgemaster -shadowd   [Version 6 or later]

• Version 6 release must install the Update 1 patch to make the shadow master work.
• Version 5.3 and its patch releases need to create a symbolic link to each of shadow masters as shown below at $SGE_ROOT/default/spool/qmaster directory. This is because the shadow daemon still looks for the following file name associated with the old hostname while the rcsge script looks for the file name associated with the new hostname assigned to the Grid Engine traffic. An example is given below.

     % ls -l $SGE_ROOT/default/spool/qmaster 
     ...
     lrwxrwxrwx 1 sge sge 17 Sep 28 09:01 shadowd_host1-ge.pid -> shadowd_host1.pid
     -rw-r--r-- 1 sge sge 17 Sep 28 09:00 shadowd_host1.pid
     lrwxrwxrwx 1 sge sge 17 Sep 28 09:02 shadowd_host2-ge.pid -> shadowd_host2.pid
     -rw-r--r-- 1 sge sge 17 Sep 28 09:00 shadowd_host2.pid
  

  In this example, host1 and host2 are hostnames for two shadow masters. Also host1-ge and host2-ge are the names for Grid Engine network interfaces.

     % cat /etc/hosts
     #
     # hostnames
     #
     192.168.8.10   host1
     192.168.8.11   host2
     #
     # Grid Engine Network 
     #
     192.168.9.10   host1-ge
     192.168.9.11   host2-ge
  

• Version 5.3 and its patch releases need to keep both new and old hostnames in the shadow_masters file due to the reason mentioned above. An example is given below.

     % cat shadow_masters
     host1
     host2
     host1-ge
     host2-ge